The effect of the material used and the pulp chamber extension depth on stress distribution of endocrowns: A three-dimensional finite element analysis
Article Sidebar
-
Finite Element Analysis, endocrown, stress distribution, endodontically treated teeth, CAD-CAM
Abstract
Aim: The aim of this study was to examine the effects of materials used and the depth of extension into the pulp chamber on stress distribution in mandibular molar endodontically treated teeth with endocrown restoration using three-dimensional (3D) finite element analysis (FEA).
Methodology: Three-dimensional finite element analysis models were obtained at two different pulp chamber extension depths by taking a tomography of a root canal-treated mandibular molar tooth extracted for periodontal reasons: 2.5 mm (Model A) and 3.5 mm (Model B). Models were divided into the following three groups according to material type used: Vita Enamic (VE), Lava Ultimate (LU), and IPS e.max CAD (EMX). The aforementioned model groups were further divided into the following two subgroups according to the types of cement used: NX3 and MaxCem Elite Chroma (MX). Maximum principal stress (MPa) values under 600 N vertical load were investigated to evaluate the effect of restoration design, material type, and cements used on stress distribution.
Results: The maximum stress on the restoration was observed in the EMX material type (13.000 MPa) in the MX cement group in Model A, while the lowest was observed in the LU material (5.932 MPa) in the NX3 cement group in Model A. The areas of highest stress for both Models A and B were observed in the restoration areas corresponding to the enamel margins.
Conclusion: Materials with a higher elastic modulus show a higher stress area on the restoration surface, while the stress values they transmit are lower. Materials with the elastic modulus close to dentin have more homogeneous stress distributions within the restoration.
How to cite this article:
Güntekin N, Mohammadi R, Tunçdemir MT. The effect of the material used and the pulp chamber extension depth on stress distribution of endocrowns: A three-dimensional finite element analysis. Int Dent Res 2022;12(Suppl.1):1-9. https://doi.org/10.5577/intdentres.436
Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.
Full text article
Authors
Copyright © 2022 International Dental Research
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This is an Open Access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.