Effect of plate configuration on resistance in mandibular angle fractures





Mandibula, fracture, stabilisation


Aim:  This in-vitro experimental study compared the biomechanical behaviors of three single-miniplate osteosynthesis configurations used in the treatment of mandibular angle fractures.

Methodology: Twenty-one synthetic polyurethane hemimandible replicas including the medullar and cortical portions were used in this study. The replicas were divided randomly into three groups (n = 5/group). Data from the three groups were compared using analysis of variance and the Tamhane T2 test. P values < 0.05 were considered to indicate significance. The replicas in all groups were fixed with 7-mm-long self-tapping screws and 2.0-mm four-hole miniplates in three different configurations external oblique, lateral angulus superior and lateral angulus inferior configuration.

Results: The replicas were tested on a servohydraulic apparatus, and the data were transmitted to a computer for analysis of peak displacement and peak force. Peak load and peak displacement did no differ significantly among the three groups..

Conclusion: This experimental study showed that the torsional forces resulting from the fixation of miniplates for the treatment of mandibular angle fracture did not differ among the three configurations tested.


How to cite this article: Polat ME, Ghahramanzadeh asl H, Yanık S. Effect of plate configuration on resistance in mandibular angle fractures. Int Dent Res 2020;10(1):6-11. https://doi.org/10.5577/intdentres.2020.vol10.no1.2


Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.


Download data is not yet available.




How to Cite

Polat, M. E., Ghahramanzadeh Asl, H., & Yanık, S. (2020). Effect of plate configuration on resistance in mandibular angle fractures. International Dental Research, 10(1), 6–11. https://doi.org/10.5577/intdentres.2020.vol10.no1.2
Smart Citations via scite_